$108.00 – Sold Out
Style : Nakiri Knife
Length : 165mm (6.5")
Weight : 5.1 oz (145g)
Special Feature : Kurouchi, San Mai (Carbon Steel Core, Iron Clad)
Blade Steel Type : Hitachi White #2
Handle material : Ho wood with Pakkawood ferrule
HRC : 61
Bevel Angle Ratio : 50/50
Cover : Not included
This line of Kintarō are made with Hitachi White #2 core steel jacketed in soft iron cladding with a Kurouchi (forge scale) finish. These knives are a great option for those considering a foray into carbon steel knives as they are thin out of the box and sharpen to a keen edge with ease. The Kurouchi finish will help mitigate some of the reactivity of the cladding, but please be aware that this knife can still patina and rust if not cared for. We recommend wiping the blade clean and dry after use and coating with Tsubaki oil if you plan to store it long-term. A Sabitoru or Pikal metal polish may be used to remove undesired patina or rust.
All Kintarō knives have a rounded choil for a more comfortable grip, a nice distal taper with a thin tip for precision cuts and an excellent grind. We recommend thinning and treating the bevels on each side of the knife as you would a single bevel; sharpening them as you go to maintain the knife's geometry over time.
San-mai (lit. three sheets) is a style of manufacture common for Japanese knives. A more practical translation is "three layers", referring to the core hardened steel being jacketed with soft steel. These style of knives may seen being referred to as "clad" or "kasumi", which has some overlap with a similar style of manufacture called Ni-mai or "two layers". Ni-mai is commonly found in single bevel knives where the soft steel is only on one side of the knife with a small portion spilling over to the other side.
Kintarō knives are produced in Takefu knife village in Fukui Japan by a blacksmith collective headed by Yoshimi Kato, the son-in-law of Hiroshi Kato. Yoshimi Kato has stepped in to fill his father-in-law's shoes and has done so admirably, producing knives with a high level of attention to detail. Kintarō produces some of the most desirable carbon steel knives available in the United States today and we're excited to be carrying them.
Nakiri (lit. Vegetable cutting knife) is a double bevel variant of the traditional single-bevel Usuba. Its profile is quite flat, even when compared to the already-flat-profile of a Japanese Gyuto; this flatness lends itself well to push-cutting tasks since more of the knife will contact the board at one time. It is common for Nakiri to have some degree of curvature to the middle of the blade so that there is less risk of introducing recurve into the blade while sharpening and also to accommodate inconsistencies and low spots in a cutting board that may impact the knife's ability to make a full cut. As the name implies, a Nakiri is ideal for vegetables and any cutting tasks not requiring or heavily benefiting from having a sharp tip for precise work.
Carbon steel knives will rust if not maintained properly. Use the Tsukiji Masamoto Rust Remover or Sabitohru Rust Remover to clean oxidized blades.